Opens in a new tab
Our Sam Rittenberg showroom is open Monday to Saturday, 10am – 6pm. Walk in, or book time with a furniture specialist.

Real Wood, Veneer or Particleboard: How to Tell What a Chest of Drawers Is Made Of

A real wood chest of drawers is one built from solid hardwood boards: the top, the sides, the drawer fronts and the drawer boxes are all cut from lumber, not from a thin sheet of wood glued over a pressed panel. The trouble is that furniture labels blur that line. “Wood,” “all wood,” “wood construction” and even “solid wood” get used loosely, and particleboard is technically made of wood. The good news is that you can usually tell the difference yourself in about two minutes, with your eyes and your hands.

What the words on the tag actually mean

Three terms do most of the damage, and separating them is most of the work.

Solid hardwood means boards milled from a log, such as oak, cherry, maple or walnut. The grain you see on the face runs all the way through the thickness of the board.

Veneer is a thin slice of real wood glued over a core. The veneer itself is wood. The question is always what sits underneath it.

Engineered panel covers plywood, which is thin layers of wood glued in alternating directions; particleboard, which is wood chips and resin pressed into a sheet; and MDF, or medium-density fiberboard, which is wood fibers and resin pressed finer and denser. Plywood is strong and stable. Particleboard and MDF hold a screw poorly and swell when water reaches them.

So “all wood” can honestly describe a chest whose case is particleboard with a printed grain on top. The words on the tag matter less than what you find when you open a drawer.

Five checks you can run in the store

  1. Follow the grain around a corner. On a solid board, the pattern on the top continues over the front edge and keeps going. On a veneered panel you often see a thin banding strip at the edge, or a grain pattern that stops dead at the corner.
  2. Pull a drawer all the way out. Look at the sides and the back of the drawer box, not the front. A solid wood box shows end grain at the corners and joinery you can see. A stapled fiberboard box behind a wood-look front tells you the rest of the story.
  3. Look at the back and the inside. A chest built from hardwood is usually finished where nobody looks. A thin fiberboard back tacked on with staples is a different class of piece.
  4. Watch for a repeating pattern. Printed grain repeats. If two drawer fronts carry the same knot in the same place, you are looking at a photograph of wood rather than wood.
  5. Do not trust weight. This is the test shoppers rely on most and it is the least reliable one. Particleboard is dense, and a big particleboard chest can be heavy. Heft tells you about mass, not about material.

Where veneer belongs and where it does not

Veneer has a worse name than it deserves. Cabinetmakers have used it for centuries to wrap a curved front, to carry one piece of figured grain across a panel wider than any board, or to book-match a pattern down the middle of a door. Veneer laid over a plywood core, thick enough to be sanded, is honest furniture.

The problem is the modern shortcut: a paper-thin layer, or a printed foil, over particleboard. It cannot be sanded without going through. A chipped edge cannot be filled and blended back in. And when a drawer runner works loose, there is nothing solid for the screw to bite into. A chest like that has a service life rather than a second life.

How a real wood chest of drawers is built

At Charleston Amish Furniture, the hardwood case pieces are built to order in small Amish family workshops in Ohio, Pennsylvania and Indiana. A chest is not pulled off a warehouse shelf; it is started after you choose it. You sit down with a furniture specialist and make four decisions: the wood, the finish, the hardware and the size. There are nine hardwoods to choose from, including live edge and reclaimed barnwood, more than 180 finishes or a color matched to something you already own, and more than 1,000 hardware styles.

These are working shops, not a picture of the past. They run off the grid on diesel, air and hydraulic power, and the families in them have been building case goods for generations. We visit them, so a specialist can tell you which workshop built the chest you are standing in front of. For more on that side of it, see how a piece is made in the workshops; for woods, joinery and drawer boxes in detail, the solid wood chest of drawers buying guide goes deeper than this article does.

Not every piece on the floor is Amish-built, and a specialist will tell you which is which. Upholstery and accents come from makers such as Smith Brothers in Berne, Indiana, Rowe in Salem, Virginia, Natuzzi and Uttermost.

Choosing the hardwood and the finish

Once you know a chest is solid hardwood, the next question is which hardwood. Red oak has an open cathedral grain, named for its large arches, and takes a stain evenly. Maple is fine and close-grained, so it reads calm and modern. Cherry starts light and deepens with exposure to light over the first year or two. Walnut arrives dark. Then the finish changes all of it again, which is why color is worth judging in person, against the actual wood, rather than on a screen. There are more than 180 finishes to work through, and the finish options page is a good place to start.

Size is the decision people underestimate. A tall chest, a tallboy and a dresser hold roughly the same clothes in very different footprints, and in an older Charleston bedroom with a window on one wall and a door on another, the footprint decides everything. Our piece on sizing a tall chest, tallboy or dresser works through the measurements. Because the chest is built to order, the height and depth can be changed to fit the wall you actually have.

Solid wood moves with the seasons, and the Lowcountry gives it plenty to respond to. Keep relative humidity between 25 and 45 percent, keep the chest out of direct sunlight and away from a heat vent, dust it with a slightly damp cloth along the grain, blot spills rather than wiping them, and polish about once a month with a wax-free, silicone-free polish. Our furniture care guidance covers the rest.

Come see the difference in West Ashley

All of this is easier to judge with your hands than from a photograph. Charleston Amish Furniture is at 1750 Sam Rittenberg Boulevard in West Ashley, with 35,000 square feet of floor, open Monday through Saturday from 10am to 6pm and closed Sunday. Pull the drawers out. Look at the backs. Ask where a piece was built and what the top is made of.

When you are ready, a specialist can walk the floor with you, and the white-glove team delivers the finished chest to the room, assembles it and sets it in place. You can contact the Charleston showroom or call (843) 225-2513. A real wood chest of drawers outlives the room it was bought for, which is the whole point of choosing one carefully.

Frequently asked questions

Is everything in the showroom Amish-made?

No. The hardwood case pieces, including chests of drawers, are built to order in Amish family workshops in Ohio, Pennsylvania and Indiana. Upholstery and accent pieces come from other makers, including Smith Brothers in Berne, Indiana, Rowe in Salem, Virginia, Natuzzi and Uttermost. A specialist will tell you which is which as you walk the floor.

Can a solid wood chest of drawers be refinished later?

Yes. There is enough thickness in a solid board to sand a surface back and put a new finish on it, which is why a hardwood piece can be changed to suit a different room decades later. A paper-thin veneer or a printed foil over particleboard has no such margin: sanding goes straight through it, and a chipped edge cannot be blended back in.

Which hardwood is best for a bedroom chest?

There is no single answer, which is why there are nine to choose from. Oak shows an open, visible grain. Maple is close-grained and calm. Cherry starts light and deepens with exposure to light over the first year or two. Walnut is dark from the start. The decision usually comes down to the wood already in the room and the finish you want over it.

How long does a built-to-order chest take to arrive?

Build time depends on the workshop, the wood and how full the shop’s schedule is, so it is quoted for your order rather than promised in advance. You leave with a written specification and a build time when the order is placed, and the white-glove team delivers the finished chest to the room, assembles it and sets it in place.

What should I ask a salesperson to find out what a chest is made of?

Three questions do most of the work: what is the top made of, what are the drawer sides and back made of, and is any surface a veneer over a core. Straight answers to all three tell you more than any label on the back of the piece. If a store cannot answer them, that is an answer too.

Related posts

Leave the first comment

Ask about a piece

Tell us about the room

Nothing is priced online and nothing ships from a warehouse. Tell us what you are looking at, and someone who knows the workshop will come back to you within one business day.